Dishwasher Not Level Leaking: A Step-by-Step Guide to Fix It

If you’ve discovered that your dishwasher not level leaking is causing puddles on your kitchen floor, you’re likely frustrated and looking for a quick fix. Don’t worry; you’ve come to the right place. This comprehensive guide will walk you through the steps to identify and solve the issue.

Dishwasher Not Level Leaking
From by Keegan Checks

Identifying the Problem

Before you start repairing your dishwasher, it’s crucial to understand why it’s not level and why it’s leaking. Dishwashers are typically designed to sit level for optimal performance. When they’re not level, water can easily escape, causing leaks.

Tools You Will Need

Spirit Level

Adjustable Wrench

Towels or Rags


Step 1: Disconnect the Power

Begin by disconnecting the power to your dishwasher for safety reasons. First, locate the power cord and follow it to the power outlet.

Grasp the plug firmly and pull it out of the wall socket to ensure that the appliance is completely disconnected. This is a crucial step to prevent the risk of electric shocks while you work on the machine.

Step 2: Check for Level

Once the power is disconnected, you’ll need to determine whether the dishwasher is level. To do this, place a spirit level on the flat surface on top of the dishwasher.

You’ll want to look at the bubble inside the spirit level; if it’s not centered between the guidelines, it means your dishwasher is not level and could be the reason it’s leaking.

See also  Dishwasher Not Automatically Draining? Here’s What You Need to Do

Step 3: Locate the Leveling Legs

With the dishwasher’s status established, the next step is to locate the leveling legs. Crouch or kneel down to get a good look under the dishwasher.

You’ll typically find the leveling legs situated at each of the front corners. These are screw-like appendages that can be adjusted to level your dishwasher.

Step 4: Adjust the Leveling Legs

After identifying the leveling legs, use an adjustable wrench to modify their height. Turn the leveling legs clockwise to lower them or counter-clockwise to raise them.

After making a few adjustments, place the spirit level back on top of the dishwasher to verify that it’s now level. You may need to go back and forth a few times, adjusting and then checking, to get it just right.

Step 5: Test for Leaks

Once you’ve confirmed that the dishwasher is level, it’s time to reconnect the power. Plug the cord back into the wall socket and turn the dishwasher on.

Run a short or empty cycle to see if any water leaks out. Have some towels or rags at hand to catch any potential leaks. If the dishwasher runs without leaking, you’ve successfully resolved the problem.

Please note that specific steps to access and replace damaged parts in your dishwasher will vary depending on the model of your appliance. For more specific information, check your manual.

For more articles on dishwashers, click here: Dishwasher Problems and Solutions: Your Ultimate Guide to Hassle-free Dishwashing

Conclusion: Dishwasher Not Level Leaking

Addressing a dishwasher not level leaking issue may seem daunting at first, but it’s a problem that’s usually quite straightforward to fix. With the right tools and a methodical approach, you can correct the level of your dishwasher and prevent water leaks, often without the need for professional assistance.

See also  Why Isn't Water Going to My Dishwasher? A Comprehensive Guide