Dishwasher Says OE: Your Comprehensive Guide to Fixing the Error

If your dishwasher says OE, you’re probably looking for a quick and effective solution. You’re in the right place. This article will walk you through a series of steps designed to help you resolve the ‘OE’ error message displayed on your dishwasher. Rest assured, you’re not alone; this is a common issue that can be fixed with some simple troubleshooting.

Dishwasher Says OE
From Pexels.com by PhotoMIX Company

Understanding the ‘OE’ Error Code

The ‘OE’ error usually indicates a problem with the water draining system of your dishwasher. This can occur due to a variety of reasons, such as a clogged filter, kinked drain hose, or even a faulty pump.

Things You’ll Need

Screwdriver

Bucket

Cloth or towel

Step 1: Turn Off and Unplug the Dishwasher

Before you begin troubleshooting, it’s important to turn off and unplug your dishwasher to avoid any electrical hazards. Locate the power outlet and carefully unplug the dishwasher from it.

Step 2: Check the Filter

Open the dishwasher and locate the filter, usually found at the bottom. Remove it by twisting or unlocking it, depending on your model. Clean the filter under running water and remove any food particles or debris. Place the filter back in its original position.

Step 3: Inspect the Drain Hose

Locate the drain hose usually at the back of the dishwasher. Make sure the hose is not kinked or bent, as this could restrict water flow. Straighten it out if necessary.

See also  Dishwasher Not Draining After New Disposal Installed: The Complete Guide

Step 4: Check the Drain Pump

Gain access to the drain pump, typically found at the bottom of the dishwasher. Check for any obstructions like food particles or glass. Remove any blockages you find.

Step 5: Run a Test Cycle

After completing the above steps, plug your dishwasher back in and run a short wash cycle. Observe if the ‘OE’ error clears. If it doesn’t, it may be time to consult a professional.

Please note that specific steps to access or replace damaged components will vary widely depending on the model of your appliance. For specific information, please check your manual or consult a technician.

For more articles on dishwashers, click here: Dishwasher Problems and Solutions: Your Ultimate Guide to Hassle-free Dishwashing

Conclusion: Dishwasher Says OE

Fixing a dishwasher that says OE is usually a straightforward process. By following these steps, you’re likely to resolve the issue without much hassle. If the problem persists, it might be best to seek professional help.