Dishwasher Not Finishing? Solve the Problem in 5 Easy Steps

If your dishwasher not finishing its cycle has brought you to the brink of frustration, you’re in the right place. This guide offers clear, step-by-step instructions to help you identify and solve the issue.

Dishwasher Not Finishing
From Pexels.com by PhotoMIX Company

Step 1: Check the Control Panel

The control panel is the brain of your dishwasher. If your dishwasher is not finishing its cycle, start here.

  • Unplug your dishwasher from the power source.
  • Open the door of the dishwasher and locate the control panel.
  • Look for any visible damage or loose wires.
  • If you find issues, you may need to replace the control panel.

Step 2: Inspect the Door Latch

A faulty door latch can prevent your dishwasher from completing its cycle.

  • Open and close the door a few times to test the latch.
  • If it doesn’t lock properly, consider replacing the latch.

Step 3: Examine the Drain

Clogs in the drain can stop your dishwasher from finishing its cycle.

  • Unplug your dishwasher.
  • Open the dishwasher and remove the bottom rack.
  • Locate the drain and check for any blockages.
  • Remove any blockages you find.

For more articles on dishwashers, click here: Dishwasher Problems and Solutions: Your Ultimate Guide to Hassle-free Dishwashing

Step 4: Look into the Filter

A dirty filter can cause water to back up, preventing your dishwasher from finishing its cycle.

  • Locate the filter, usually found at the bottom of the dishwasher.
  • Remove the filter and clean it under running water.
  • Reinstall the filter and run a test cycle.
See also  Upper Rack of Dishwasher Not Cleaning? 5 Proven Solutions

Step 5: Call a Professional

If you’ve followed all the steps and your dishwasher is still not finishing its cycle, it may be time to consult a professional for diagnosis and repair.