Dishwasher Not Ejecting Tablet: Ultimate 5-Step Guide To Fixing

If you’re facing a dishwasher not ejecting tablet issue, you’re not alone. This problem is common but completely solvable. In this guide, we’ll walk you through a step-by-step process to diagnose and resolve this annoying issue.

Dishwasher Not Ejecting Tablet
Elke Wetzig, CC BY-SA 4.0, via Wikimedia Commons

Step 1: Turn Off and Unplug the Dishwasher

Before you start troubleshooting your dishwasher, it’s crucial to turn it off and unplug it from the electrical socket for safety reasons. Locate the plug, which is generally situated below the sink, and unplug it.

Step 2: Check the Detergent Dispenser

Open the dishwasher door and locate the detergent dispenser, usually found on the inside of the door. Make sure it is clean and free of old detergent residues. A clogged dispenser can prevent the tablet from ejecting.

Step 3: Examine the Tablet Slot

While the dispenser is open, take a closer look at the slot where the tablet is supposed to go. Ensure that it is not warped or damaged, as this can obstruct the tablet from being ejected during the wash cycle.

Step 4: Inspect the Dishwasher Door

Close the dishwasher door and check if it is sealing properly. Sometimes, a poor seal can prevent the internal mechanisms from functioning correctly, which includes the tablet ejection process.

For more articles on dishwashers, click here: Dishwasher Problems and Solutions: Your Ultimate Guide to Hassle-free Dishwashing

See also  Dishwasher Water Usage Comparison: A Detailed 8-Step Guide

Step 5: Test the Release Mechanism

With the dishwasher door open, manually activate the release mechanism for the detergent dispenser, often a push-button or latch. If it’s not functioning smoothly, you may need to replace this component.

In summary, a dishwasher not ejecting tablet is a common problem with a range of potential solutions. We hope this guide has been helpful in resolving this issue for you.