Dishwasher Is Not Emptying Water? Ultimate 5-Step Guide

If your dishwasher is not emptying water, it can be a frustrating and inconvenient issue. This guide will provide you with detailed, step-by-step instructions to diagnose and fix the problem, even if you’re not an expert in appliance repair.

Dishwasher Is Not Emptying Water
From Pexels.com by Wendelin Jacober

Step 1: Safety First

Before you begin, it’s essential to take safety precautions:

  1. Turn off the dishwasher and unplug it from the electrical outlet.
  2. If you can’t reach the plug, turn off the circuit breaker that controls the dishwasher.
  3. Wear gloves to protect your hands from sharp edges.

Step 2: Check the Drain Hose

The drain hose might be clogged or kinked. Here’s how to inspect it:

  1. Locate the drain hose at the back of the dishwasher.
  2. Inspect it for kinks and straighten them out if necessary.
  3. Check for clogs by disconnecting the hose and running water through it. Remove any obstructions.
  4. Reconnect the hose and ensure it’s securely attached.

For more articles on dishwashers, click here: Dishwasher Problems and Solutions: Your Ultimate Guide to Hassle-free Dishwashing

Step 3: Examine the Drain Pump

The drain pump might be blocked. Here’s how to check it:

  1. Remove the dishwasher’s lower rack and spray arm.
  2. Locate the drain pump at the bottom of the dishwasher.
  3. Inspect it for debris or foreign objects and remove them if found.
  4. Check the pump’s impeller to make sure it’s not damaged.
See also  Dishwasher Not Pushing Water: Your Complete Guide to Solving the Problem

Step 4: Inspect the Filter

A dirty filter can also cause drainage issues:

  1. Locate the filter, usually found at the bottom of the dishwasher.
  2. Remove the filter and clean it with warm, soapy water.
  3. Replace the filter and make sure it’s securely in place.

Step 5: Test the Dishwasher

After performing these checks, test the dishwasher:

  1. Plug the dishwasher back in or turn on the circuit breaker.
  2. Run a short wash cycle to see if the water drains properly.

Dishwasher Is Not Emptying Water: Conclusion

If you’ve followed these steps and your dishwasher is still not emptying water, it may be time to consult a professional technician. These instructions should cover most common issues, but some problems may require specialized tools and expertise.